There is one pinhole on each end of the sway brace, with pin for hanging chains, connecting sway brace and truss by pin. There is a connecting clamp in the middle of sway brace, so as to bend the sway brace for convenience of transport. There is also turn buckle on the sway brace for adjusting the length of brace. In the turn buckle, there is length indicator collet, turning the buckle to brace end in touching with length indicator collet means the brace is in proper length. One end of the turnbuckle, there is locknut, preventing brace from releasing.

Two sway braces are set to the cross of two trusses, assuming the lateral wind-force to the bridge vertically. While installing brace, keep in proper length, tighten the nut, so as to keep the bridge straight and assume wind-force effectively.

Product Tags:

Sway Brace for CB321/100 &CB/HD200 Bailey Bridges

Bailey Bridge

Compact 200 (CB200) Bailey Bridge Configuration

Compact 200 Bailey Bridge Cases

CB100(CB321) Bailey Bridge Configuration

CB100(CB321) Bailey Bridge Cases

Muti-span Bailey Bridge

Bailey Suspension bridge

Typical Bailey Bridge Components

GW D Assembly Steel Bridge(Patent)

GW D Steel bridge cases large span

Box Beam Bridge

Bridge launching

Container Movement Set

Pontoon Bailey Bridge

Sway Brace for CB321/100 &CB/HD200 Bailey Bridges

sway bar linkage

rear sway bar link replacement

cb joint